SN74AHC1G14 PSPICE Model

Jaden Ghylin102047

Expert 1140 points

Other Parts Discussed in Thread: SN74AHC1G14

Where can I get an unencrypted PSICE model for SN74AHC1G14 ?

-Jaden

over 10 years ago

0 LeonardEllis over 10 years ago

TI__Guru 71526 points

Jaden,

There is an HSPICE model on the webpage: http://www.ti.com/product/SN74AHC1G14/toolssoftware .

HSPICE Model for SN74AHC1G14

Can you import this for PSPICE?

I recall a PSPICE model request page, but I can't find it right now . . . will continue to look in the meantime.

~Leonard

0 James Lockridge19 over 10 years ago

TI__Genius 14487 points

Jaden,

We do not supply unencrypted models without a disclosure agreement.

James

0 Jaden Ghylin102047 over 10 years ago in reply to James Lockridge19

Expert 1140 points

NDA Is in place. How do we get the unencrypted model?

-Jaden

0 James Lockridge19 over 10 years ago in reply to Jaden Ghylin102047

TI__Genius 14487 points

It looks like the model will have to be generated. Do you have an FAE you are working with on your design? We recommend you contact them with this request because a business case will have to be created to prioritize this request.

James

0 James Lockridge19 over 10 years ago in reply to Jaden Ghylin102047

TI__Genius 14487 points

If you don't have a TI FAE to request the model for you, you may contact the Product Information Center at (512) 434-1560 or by filling out the form at: http://www-k.ext.ti.com/sc/technical-support/email-tech-support.asp?AAP for further assistance.
James

Logic

Logic forum

SN74AHC1G14 PSPICE Model