• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 18 subscribers
  • Views 889 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

"dc drive strength" of TXB0108

Rahul16136
Intellectual 300 points

Hi,

     I am using TXB0108 in my design. It is specified that TXB0108 has very "low dc drive strength", but not given exactly the values of IOH & IOL.

Can anyone tell me what is the "dc drive strength" supported by TXB0108.

Also is there any bidirectional voltage translator (auto direction sensing) with higher "dc drive strength".

 

Thanks & Regards,

Rahul.

  • 0
    TI__Genius 9085 points

    Hi Rahul.

    When the output of the device is in a steady high or low state, it is exclusively driven by the 4k Ohm impedance buffer.

    This device works best in applications with less than 70pF loading, and with high load resistance.

    The only other option at this point for auto-direction sensing translators are the TXS devices. These have no independent DC low drive, the low state is controlled by the active external driver. On the high state they are driven by the internal pull-up resistors.

    The direction controlled translators have higher drive strengths.

    Regards,

    Hattie

  • 0 in reply to Hattie
    Intellectual 300 points

    Thanks Hattie.