• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 17 subscribers
  • Views 258 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74ALVTH16374DL Output-Slew Rate

cafain
Mastermind 6535 points
Other Parts Discussed in Thread: SN74ALVTH16821

Hi

SN74ALVTH16374DL Output-Slew Rate

How much is Slew-Rate of the output signal?

In addition, please provide a simple output constitution figure.

Capacity, which is connected to the output terminal is I think a longer Slwe-Rate.

(Output current I use within the specified)

Please tell me the cause of converting the Slew-Rate other than capacity connection.

Best regards

  • 0
    TI__Genius 9860 points

    Hi cafain, what are your test conditions?

    Here is a waveform of the slew rate for the SN74ALVTH16821, which is in the same family so the waveforms should be very similar to the 16374 (we do not have readily available data for the 16374).

    Slew rate will be decreased with output capacitance and output series resistance, as well as lower VCC.