TUSB1106

Mike Wang2

Other Parts Discussed in Thread: TUSB1106, TXS0202

Hi,

My customer is asking about TUSB1106. It's a transceiver for USB, but I see it only does some level shift function. So can we replace it with our level shifter device? What is the difference between them?

Thanks,

Mike

over 10 years ago

0 Elias Villegas M. over 10 years ago

TI__Guru* 76130 points

Moving to signal switches Forum.
Regards

0 Adam Torma over 10 years ago in reply to Elias Villegas M.

TI__Mastermind 45700 points

Mike,

The difference between the TUSB1106 and a basic level shifter like the TXS0202 is the control logic pins the USB ASIC has access to configure the TUSB1106. The TUSB1106 can be configured to transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates and to use single ended or differential data input interface.

What is the customer application that they are looking for a level shifting device. Do you have a schematic or diagram of what solution they are trying to achieve?

Thank you,
Adam

0 Mike Wang2 over 10 years ago in reply to Adam Torma

TI__Intellectual 2760 points

Hi Adam,

The customer is designing a industrial camera. they find their competitor was using TUSB1106 but seems this function can be acheived by a level shift. So they are considering using a level shift for cost down. I think the TUSB1106 is not very competitive to simple level shift.

BR,
Mike

0 Adam Torma over 10 years ago in reply to Mike Wang2

TI__Mastermind 45700 points

I'm going to move this thread to the level shifter forum so they can help you with a recommendation.

Adam

Logic

Logic forum

TUSB1106