MUX switching time

Hi Binu ,

The switching time from one channel to another will be the Channel select to COM/Yn as per the switching characteristics in the datasheet and usually the max time is the concern rather than the minimum .

Do you mean the prop delay for switching ,for e.g , COM from Y1 to Y2 including the delay of channel select ? This will be the combination of the 2 prop delay on the datasheet .

I want to know the minimum switching time from    Y1 --COM    to  Y2--COM

Not propagation delay through Y1--COM.

In datasheet I think there is propagation delay time only.

Hi Binu ,

Sorry , I do not have the switching time between channels per se. The production testing has channel select delay which is what the switching between Y1 to Y2 would involve; the delay from channel select signal enabling to the time output switches from Y1 to Y2 .