SDIO buffer for SPI

Fabio Bucci

Other Parts Discussed in Thread: TXB0104, TXB0108, SN74AVC4T774

Hi,

I'm looking for a SDIO buffer for SPI with the following specs:

1) 1.8 and 2.5 Volt.

2) Max freq 50MHz

3) 12 channels

Do we have any device fitting the bill? Can the TXB0104 and TXB0108 do the job?

Thanks

0 aozer over 8 years ago

The TXB will only support up to 30MHz for 1.8V to 2.5V. Have you looked at the SN74AVC4T774? It is designed with SPI applications in mind.

0 ShreyasRao over 8 years ago

Bo ,

do you need translation feature to the buffer ?
www.ti.com/.../buffer-driver-transceiver-products.page

This is list of buffers /drivers supporting 1.8V and above with 8-16channels and supporting 50Mhz .

0 Fabio Bucci over 8 years ago in reply to aozer

Aozer,

where did you find the 30MHz limitation into the datasheet?

0 aozer over 8 years ago in reply to Fabio Bucci

Under the Timing Requirements we can see that the max data rate is 60Mbps. This can be approximated to a frequency of 30Mhz.

Logic forum