SN74AHC123A - some questions

Hirotaka Matsumoto

Other Parts Discussed in Thread: SN74AHC123A, SN74LV123A

Hi all

Would you mind if we ask SN74AHC123A

<Question1>
Do you have the figure as like Figure9 on the datasheet P10 with10pF?

<Question2>
How much is the minumum output pulse? 5ns?
Could you let us know the condition which can output the minumum pulse?
And then, our customer are looking for the device which can output with minmum tw=20ns width pulse.
How about SN74LV123A?

Kind regards,

Hirotaka Matsumoto

over 7 years ago

0 Hirotaka Matsumoto over 7 years ago

Guru 27585 points

Hi team

Could you give us the reply?

Kind regards,

Hirotaka Matsumoto

0 ShreyasRao over 7 years ago in reply to Hirotaka Matsumoto

TI__Guru 58020 points

Hirotaka san ,

Based on the capacitor and resistor , the 20ns is doable . Be mindful of the retrigger time requirements. SN74LV123A can also be considered .
The min pulse duration is 5nS according to the datasheet.

Please refer AHC123A app note and calculations here :
www.ti.com/.../scla014.pdf

0 Hirotaka Matsumoto over 7 years ago in reply to ShreyasRao

Guru 27585 points

ShreyasRao san

Thnak you for your reply.

Based on the capacitor and resistor , the 20ns is doable.
->OK, we got it.

Could you let us know about <Question1>?
Of course, if you have it, could you give us it?

Kind regards,

Hirotaka Matsumoto

0 Hirotaka Matsumoto over 7 years ago in reply to Hirotaka Matsumoto

Guru 27585 points

Hi team

Could you give us the reply?

Kind regards,

Hirotaka Matsumoto

0 ShreyasRao over 7 years ago in reply to Hirotaka Matsumoto

TI__Guru 58020 points

Hi Hirotaka san ,

I think you are referring to fig 9 of page 12 of the datasheet to get to know K factor. The 10pF is given in the fig to be 4.5.
you could also back calculate it from fig 5 for 10pF , the k factor is around 5-6.

Logic

Logic forum

SN74AHC123A - some questions