TXS0102 using for I2C application with 1meter long wire.

Pravin Raut69

Other Parts Discussed in Thread: TXS0102, PCA9306

Hello All,

We are using TXS0102 for I2C application. I am controlling AT24c512 using I2C protocol. Distance between My controller card and slave AT24C512 is around 1 meter. Can TXS0102 drive those signals??

or i need any extra provision for it.....

over 9 years ago

0 aozer over 9 years ago

TI__Mastermind 31865 points

Hello Pravin,

A wire this long will probably cause issues with the TXS0102 due to the capacitance. Have you considered the PCA9306? I think it would be a better option.

0 Pravin Raut69 over 9 years ago in reply to aozer

Prodigy 60 points

Hello Aozer,

Thanks for your replay.

Yes, PCA9306 is good option for I2C bus.

We are replacing TXS0102 with PCA9306.

Logic

Logic forum

TXS0102 using for I2C application with 1meter long wire.