• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 634 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

channel to channel skew of bus transceiver

John11513
Expert 5720 points
Other Parts Discussed in Thread: SN74ALVC245, SN74LVC245A

Hi,

I noted almost all of our bus transceiver device does not specify its output channel to channel skew. However this spec is critical for some high speed signal. I wondered how can I get this spec for a specific bus transceiver device, such as SN74ALVC245?

Thank you,

John

  • 0
    TI__Guru* 97046 points
    Hi John,

    That spec is something we don't have for all of our parts, as you noted, and we could get data for a customer if it were critical for their application. Is there a reason they are using SN74ALVC245 over the SN74LVC245A (which has skew numbers on the datasheet)?