• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 481 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AUP1T98: Function table vs. Figures

ANTHONY MEDINA
Prodigy 10 points
Part Number: SN74AUP1T98

Page 2 function selection table lists Figure 11 as a noninverted buffer. Page 6 lists Figure 11 as an Inverter while Page 5 lists Figure 10 as the noninverting buffer. So which is correct the table or the figures?

  • 0
    TI__Guru* 97046 points
    Hi Anthony,

    Thank you for pointing out our error. The table is incorrect - Figure 10 is configured as a buffer and Figure 11 is configured as an inverter. This can be verified by using the logic diagram on page 4. I will arrange to have this error fixed.