Asking for the 2 bit shifter solution to replace 1bit solution

SHH

Mastermind 32526 points

Other Parts Discussed in Thread: SN74AVC2T45

Hi Team,

Could you help recommend if TI have 2 bit level shifter solution?

IEC use below parts (one bit * 2pcs) currently, thanks.

customer uses one bit *2

NXP

74AVC1T45GM

IC,LEVEL-SHIFTING,SOT886,6P,TR

Thanks,

SHH

over 9 years ago

0 Emrys Maier over 9 years ago

TI__Guru* 97666 points

Hello SHH,

We do have the SN74AVC2T45 if they are just looking for the same basic functionality in a dual channel configuration. If we knew more about the application, we might be able to make a more suitable suggestion.

0 SHH over 9 years ago in reply to Emrys Maier

TI__Mastermind 32526 points

Hi Emrys,
Thanks for feedback. I can check the application information.
please kindly help for the following questions.
1. Do SN74AVC2T45 p2p with NXP SOT886 solution?

Hi Leonard,

Thanks for sharing.

Thanks,
SHH

0 Emrys Maier over 9 years ago in reply to SHH

TI__Guru* 97666 points

Hi SHH,

I didn't find an SOT886 solution on Nexperia's 74AVC2T45 datasheet. Can you send me a link to the correct part?

0 SHH over 9 years ago in reply to Emrys Maier

TI__Mastermind 32526 points

Hi Sir,
Please refer t the following link fo rSOT886 package.
74AVC1T45GM
www.nxp.com/.../74AVC1T45.pdf

Thanks,
SHH

0 Clemens Ladisch over 9 years ago in reply to SHH

Guru 324530 points

A 6-terminal device cannot translate two bits.

Do you want one device for two bits, or two devices for one bit each?

As far as I can see, TI does not have a 74AVC1T45-compatible translator in the SOT886 (TI: DRY) package.

0 SHH over 9 years ago in reply to Clemens Ladisch

TI__Mastermind 32526 points

Hi Clemens,

Customer now uses two 1 bit solution. they are looking for 2 bit solution.

My previous question is that TI has p2p with 1 bit solution. Thanks for your feedback.

one question raised from customer.

Do TI has bi-directional 2 bit shifter solution? Can SN74AVC2T45 support?

Thanks,

Scott

0 Clemens Ladisch over 9 years ago in reply to SHH

Guru 324530 points

Yes, the 2T45 is a two-bit shifter (with a common DIR signal).

Logic

Logic forum

Asking for the 2 bit shifter solution to replace 1bit solution