This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LSF0108-Q1: Regarding Pull up requirement on A and B side

Part Number: LSF0108-Q1
Other Parts Discussed in Thread: SN74AVC8T245-Q1, SN74LVC8T245-EP

Hi

I am planning to use LSF0108-Q1 for my Automotive application.This part is used for UART translation

Does the part need pull up or pull down resistor on both the sides A and B while using for UART application .

Regards

Nitesh