TXB0108 IBIS model

I've seen issues with other users having excessive ringing on the lines. I provided a model using 50Ohm impedance, and this cleared up their problem. They were able to run successful simulations. I get the feeling that is not your issue, but I have attached the 50Ohm model.

I will look into this.

Hi,

Did you manage to find anything out? I have simulation plots from the customer showing the excessive rise times. They have also simulated with the test circuit shown on page 12 of the datasheet but didn't get the results they were expecting. I've given them your 50 Ohm model and asked them to try it.

Cheers

Calum

Calum,

I was going to run the simulation myself as well. Can you supply the results and your deck and I will run this by the engineer who manages our ibis models?

Thanks!

Hattie

Looks like the 50Ohm model you sent solved their issues.  Is there any way to make that the default model on the site?

Cheers

Calum

Great! Thank you for the feedback.

I'll see what I can do about the model. I'll have to look into what the typical approach is.