LSF0108-Q1: LSF0108_Q1

Chaitanya Kumar Reddy Mallu

Intellectual 280 points

Part Number: LSF0108-Q1
Other Parts Discussed in Thread: LSF0108

How to use LSF0108 for SPI. Can any one give the circuit diagram(Input will be 1.8,3.3,5 and output always 3.3)

over 9 years ago

0 Michael J Schultis over 9 years ago

TI__Mastermind 25235 points

Hello,

The appropriate engineer has been notified and will respond shortly.

Best,
Michael

0 aozer over 9 years ago

TI__Mastermind 32785 points

Hello Chaitanya,

You can connect it like so:

You will have to determine the pull-up resistor sizing based on the current sinking capabilities of the driving device and the desired data rates. You can find information about pull-up resistor sizing on page 13 of the datasheet.

Logic

Logic forum

LSF0108-Q1: LSF0108_Q1