• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 530 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0102-Q1: Slow input transition

Tomoaki Yoshida91
Genius 5255 points

Part Number: TXS0102-Q1

Hi team,

I have a question.

In the datasheet,  the maximum Δt/ΔV(Input transition rise or fall rate) is defined as 10ns/V.

What will happen if a slow input transition such as more than 10 ns / V is entered?

Best regards,

Tomoaki Yoshida

  • 0
    TI__Guru* 97226 points
    Hello Yoshida-san,
    Fast input edges are preferred with this device to ensure consistent operation.

    Slow edges can result in output glitches - the output can be pulled back low again by the slow input after the one-shot has finished firing.

    The TXS0102-Q1 works on many of the same principles as the LSF series of translators. If you have not had the chance yet, i would recommend watching our LSF training video series so you can understand how the device achieves translation.

    training.ti.com/LogicMinute