SN74LVC244A: Absolute Transient Spec

Jade Goo

Intellectual 1940 points

Part Number: SN74LVC244A

Hi Team,

Is there any absolute transient spec for SN74LVC244A that higher than current absoulte rating in datasheet?
In datasheet absoulte spec based on continuous, not transient case I think.
Thank you.

Best Regards,
Jade

over 7 years ago

0 Dylan Hubbard over 7 years ago

TI__Mastermind 48185 points

Hi Jade,

There isn't a spec for transient current, it is spec'd as continuous current. However, the transient current should stay under that spec as well to avoid any stress to the device.

0 Jade Goo over 7 years ago in reply to Dylan Hubbard

TI__Intellectual 1940 points

Hi Dylan,

One more question, when measured at output pin of SN74LVC244A, overshoot/undershoot already over spec than absolute rating.
Even if placed damping resistor after SN74LVC244A, actual output voltage out of absolute rating but it sholud be OK.
Please confirm it.
Thank you.

Best Regards,
Jade

0 Dylan Hubbard over 7 years ago in reply to Jade Goo

TI__Mastermind 48185 points

Hi Jade,

With the damping resistor limiting current this should be ok.

Logic

Logic forum

SN74LVC244A: Absolute Transient Spec