• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 689 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0102

Lito Guzman
Prodigy 10 points

I want to know what to do on unused input/output pins.  Thanks.

  • 0
    TI__Genius 9085 points

    Since the TXS have internal pull-up resistors, unused IOs can be left floating. I would recommend they either be left electrically unconnected (floating) or connected to VCC. These options will give you the lowest current consumption.