125MHz clock Level Translator

Mohit Saharan

Other Parts Discussed in Thread: SN74AXC1T45, SN74AUC1G125, SN74AUC1G126

Hi Team,

We have a CMOS 3.3V, 125MHz clock output which we need to feed to our PHY which is working on 2.5V. Please suggest us a level translator for this. we need to translate 3.3V to 2.5V.

over 6 years ago

0 Emrys Maier over 6 years ago

TI__Guru* 97046 points

Hi Mohit,
I would recommend SN74AXC1T45.

0 Mohit Saharan over 6 years ago in reply to Emrys Maier

Prodigy 80 points

Hi Maier,

Could you please suggest us part with EN control, as our clock is unidirectional only. We don't need to control direction.

0 Emrys Maier over 6 years ago in reply to Mohit Saharan

TI__Guru* 97046 points

Hi Mohit,
What do you need the EN pin to do? Are you trying to force the output low or into a high-impedance state?

0 Mohit Saharan over 6 years ago in reply to Emrys Maier

Prodigy 80 points

Hi Emrys Maier,

Yes EN pin should make out Output to the high-impedance state.

0 Emrys Maier over 6 years ago in reply to Mohit Saharan

TI__Guru* 97046 points

In that case, the SN74AUC1G125 or SN74AUC1G126 will do what you want.

Supply the device with 2.5V to get the 2.5V output, and the inputs can be up to 3.6V.

Logic

Logic forum

125MHz clock Level Translator