• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 18 subscribers
  • Views 342 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Seek solution

Leo He
Intellectual 420 points

the input signal:  The pulse signal generated when the power button is pressed

output.: the stable High or Low level 

Is there any solution？

Thank you!

  • 0
    TI__Guru 71526 points

    Hello Leo,

      Thanks for using E2E.  I am not understanding your inquiry, however.  Please provide a diagram of what you are attempting to design, including the pulse width, pulse repetition rate, voltage levels of the pulse, and voltage levels of the resultant detected signal. 

    A block diagram of the system, or at least this portion of it, would be helpful.  

    Thank you, 

    ~Leonard 

  • 0
    TI__Guru 71526 points
    Hello again Leo,
    I am still waiting for more information to assist with your design requirements.
    ~Leonard