• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 447 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74HC164: The overshoot

leo xue
Expert 1595 points
Part Number: SN74HC164

Hello,

   Our customer wants to know the overshoot of SN74HC164, would you please give your advice for this? thanks

  • 0
    TI__Guru* 97046 points
    Hi Leo,
    Overshoot is a result of a second order system and is dependent on many system factors; there is no 'overshoot' specification for the device by itself.

    Typically you will see the worst overshoot with light loads (<30pF) and long traces (due to increased inductance), or across transmission lines.

    Can you tell me about the customer's system? What are they trying to do?
  • 0 in reply to Emrys Maier
    Expert 1595 points
    Hi Emrys，
    Thanks for your support. I'm confirm the system issue with our customer and will give the feedback to you then. thanks again.