TXS0102: Part marking issue

Krishna Balekai12

Part Number: TXS0102

Hi,

We received above part for assembly this week and have found that the part marking mentioned on the datasheet does not match the part.

could you please confirm if this actually the part marking for the above part number.

A quick check with the part marking look-up too did not show any results. Reverse lookup matches datasheet values but not whats on the part.

the datasheet calls for 2H, 2HN or 2H7

Marking on the part received: 7CG2HI

Did we receive the correct part?

Thanks and Best regards

Krishna

over 6 years ago

0 ShreyasRao over 6 years ago

TI__Guru 62930 points

Hi Krishna,

Thanks for bringing this to our attention.
We are seeing some issues with the part marking lookup tool. I am certain that this is the right top side marking but I will confirm it tomorrow again with the team.

0 Krishna Balekai12 over 6 years ago in reply to ShreyasRao

Prodigy 130 points

Thanks Shreyas,

Looking forward to hearing from you on the part marking.

Best Regards

Krishna

0 ShreyasRao over 6 years ago in reply to Krishna Balekai12

TI__Guru 62930 points

Krishna,

Please let us know the full orderable part number including if its G4/ E4 device.
if you have the shipping label info, please provide.
I will reply once i find more information from CQE.

0 ShreyasRao over 6 years ago in reply to ShreyasRao

TI__Guru 62930 points

Krishna,

Any more inputs about the orderable part number and shipping info?
I will close the thread and it will open once you reply.

Logic

Logic forum

TXS0102: Part marking issue