• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 387 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LSF0101: Open drain level translator

Nidhi P Shetty
Intellectual 735 points
Part Number: LSF0101
Other Parts Discussed in Thread: SN74AXC1T45,

Hello

I'm looking for a level translator to convert 1.8V level clock to 1.2V clock. I found LSF0101DRYR part in TI website. 

In datasheet it is mentioned about both open drain and push pull configuration. Can I use this IC as push pull in both driver and receiver side(No pull up throughout clock/ Level Translator output line) with mentioned requirements?

Please help me out in this concern.

Regards

Nidhi P Shetty

  • 0
    TI__Guru 62180 points
    Hi Nidhi,

    I would recommend using the SN74AXC1T45 for undirectional 1.8 to 1.2V level translation. No external pullups are required on the input or output lines.
    The LSF0101 doesn't have any drive of its own but is a passive switch translator.