Hello
my customer is asking following spec. Do you have?
Vcc=1.5V
High input : Vt+ =
Low input: Vt- =
High output : Voh=
Low output: Vol=
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello
my customer is asking following spec. Do you have?
Vcc=1.5V
High input : Vt+ =
Low input: Vt- =
High output : Voh=
Low output: Vol=
Hi,
That values have to be interpolated from the values given in the datasheet in the table on page 5 as shown in the FAQ here:
https://e2e.ti.com/support/logic/f/151/t/793508?tisearch=e2e-sitesearch&keymatch=faq%3Atrue
Thanks!
-Karan