DSP EVL board for image processing

Neeraj Verma

Hi,

I am looking for DSP which has capability to process and decode QR/matrix code and determine QR code location & orientation in captured frame. Each frame should be processed in 1 milli second or less.

Could you please suggest if there is any EVL board to try out?

Thank You

Neeraj

over 5 years ago

0 Rahul Prabhu over 5 years ago

TI__Guru** 116170 points

Neeraj,

Selection of the DSP for this application will depend on many factors as most of our C674x and C66x DSP family has enough performance depending on what resolution of the QR you are processing. You can check the DSP core benchmark portal below to look at performance for standard DSP and imaging functions:

http://www.ti.com/processors/digital-signal-processors/core-benchmarks/core-benchmarks.html

the DSP selection should also take into account the peripheral set that is required for sensor input and other features in the product and also depends on the power consumption for the end product. Please enter the requirements in the filter here and see what matches the requirement.

http://www.ti.com/processors/digital-signal-processors/products.html

If you need a high level OS in your product then you can consider using an ARM+DSP SoCs in the DSP family.

Regards,

Rahul

Logic

Logic forum

DSP EVL board for image processing