• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 356 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXB0102: Schematic double-check

Zhihong Huang
Intellectual 1550 points
Part Number: TXB0102

Hi Team

Could you please help me double-check the schematic, which is designed to achieve:

1. First signal: Vin 3.3V conversing to Vout 5V.

2. Second signal: Vin 5V conversing to Vout 3.3V

.

Best Regards,

Wesley Huang

Email: wesley-huang@ti.com

  • 0
    Guru 292890 points

    There are two pins labelled "B1". But otherwise it looks OK.

  • 0 in reply to Clemens Ladisch
    TI__Genius 16735 points

    Hi Wesley,

    From what you are showing, the schematic looks good. Without knowing more information about your operating conditions such as, input/output signals, devices being driven, signal frequencies, pullups or external components on the lines, or any timing requirements, I can't confirm operation. Assuming you are operating the device within recommended conditions, your schematic will work.

    Thanks!

    -Karan