Help recommend a level conversion chip that is not a specific protocol.

user5707026

Genius 3145 points

Other Parts Discussed in Thread: SN74AXC2T45, SN74AXC1T45

The 1.8V digital signal used for FPGA output is converted to 3.3V for the DAC of the VGA chip.

Thanks

Elsa

0 ShreyasRao over 5 years ago

Elsa,

FAQ on the level translation solutions. You can also consider SN74AXC1T45/ SN74AXC2T45 which can be used for 1.8 > 3.3V GPIO level translation.

It also supports up to 300Mbps push pull signal.

Logic forum