• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 306 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] Is it necessary to have pull-down( or pullup) resistor on the OE pin or can I connect it directly to TXS/ TXB supply...

SN74LV1T125: /OE pin termination (unused the output disable function)

Yusuke Mukuno
Expert 7395 points
Part Number: SN74LV1T125

HI 

Quick question.

Could you please let me know  the /OE pin termination in case of unused the output disable function?

it can connect to GND directly, or , It is needed any pull down resistor?  (if pulldown resistor is required, please let me know the recommended value.)

Thanks

Muk