TXS0206: tpd(min) of CLK and DAT

Takashi Yamaguchi

Part Number: TXS0206

Hi team,

My customer is considering to use the TXS0206. The condition is VCCA=3.3V and VCCB=1.8V.

The customer would like to know the tpd minimum value of CLK and DAT. I know that the minimum value has not been tested, but could you estimate it? The customer is concerned about how much variability they should consider.

Regards,

Yamaguchi

over 4 years ago

0 Clemens Ladisch over 4 years ago

Guru 317280 points

Open-drain signals are actively driven low. So the variability of the other values is approximately the same as those of the H-to-L values.

0 Takashi Yamaguchi over 4 years ago in reply to Clemens Ladisch

TI__Genius 13400 points

Do you mean that CLK and DAT minimum value is approximately the same as following H-to-L values in blue? So it's around 2.4 to 2.5ns. Is my understanding correct?

0 Clemens Ladisch over 4 years ago in reply to Takashi Yamaguchi

Guru 317280 points

Yes.

Logic

Logic forum

TXS0206: tpd(min) of CLK and DAT