• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0108E-Q1: When does it operate as Open-drain output or push-pull output?

Yoshiki Ochi
Expert 8275 points
Part Number: TXS0108E-Q1
Other Parts Discussed in Thread: TXB0106-Q1,

Hi team, 

When does it operate as Open-drain or push-pull output operation? How could we configure its output as push-pull?

I would like to use it as push-pull output but I cannot find how to start push-pull output in datasheet.

It looks that I cannot use TXB0106-Q1 due to its operating temperature range; -40~125°.

Regards,
Ochi

  • 0
    TI__Guru* 96752 points

    Hello Ochi-san,

    The TXS0108E-Q1 does not change output types. The device can be used with devices that have open-drain outputs or push-pull outputs. Please see the functional block diagram in the datasheet for the structure of the device.