SN74ABT373: REV is changed from E0 to E

Keigo Shimada

Expert 5475 points

Part Number: SN74ABT373

Hi team,

Our customer has a question about REV change for SN74ABT373NSR.

Please see the attached picture. You can see REV is changed from E0 to E.

They want to know 2 points about this change.

The reason why this change happen.
Details about what difference is between E0 and E.

over 4 years ago

0 Emrys Maier over 4 years ago

TI__Guru* 97046 points

Hello Shimada-san,

I'll look into this and get back to you.

0 Emrys Maier over 4 years ago in reply to Emrys Maier

TI__Guru* 97046 points

I don't see any changes in our system that occurred recently for this device. This may be related to a change in bond wire material to copper, however I am not certain yet.

We have contacted the production site to try to determine why the revision was changed from E0 to E.

I will update you within 24 hours.

0 Keigo Shimada over 4 years ago in reply to Emrys Maier

TI__Expert 5475 points

Thank you for your support. I look forward to your update.

0 Emrys Maier over 4 years ago in reply to Keigo Shimada

TI__Guru* 97046 points

Hello Shimada-san,

The manufacturing site informed us that there has been no change to the device, and the Rev should always have been "E." I'm still investigating why this occurred, but the devices you are receiving are identical.

Logic

Logic forum

SN74ABT373: REV is changed from E0 to E