Changing device serial for CLI flashing at runtime

Sagar Vasekar

Hi, I am new to TI flashing using CLI. I have .ccxml file generated for all my TI devices but I would like to switch the serial number of the TI device at runtime as I have multiple TI devices connected to the system.

I am trying to use '--setting id=value' argument of 'dslite.sh' but that is not working. Is there any way to pass the serial of the TI board that we want to flash through CLI?

over 4 years ago

0 LeonardEllis over 4 years ago

TI__Guru 71526 points

Hello Sagar,

Please inform as to the microcontroller device you are using in this design.

Thank you,

~Leonard

0 Sagar Vasekar over 4 years ago in reply to LeonardEllis

Prodigy 10 points

Hi Leonard,

Its CC1352P1F3.

Thanks!

0 Øyvind K over 4 years ago

TI__Expert 4870 points

Hi Sagar,

I assume you are working on a Linux machine since you refer to the "dslite.sh" script. I'm not able to check this but I guess it looks similar to the windows solution where we have "dslite.bat". Since you have .ccxml files for all the different devices it should be possible to modify the script to take the .ccxml file as an argument. From the "dslite.bat" file it seems that the .ccxml file is used as argument for the CLI command. As you probably have seen the serial number is part of the .ccxml file and if you have one file for each device this should be possible.

Regards,

Øyvind

0 Rogerio Almeida over 4 years ago in reply to Øyvind K

TI__Mastermind 26205 points

Sagar,

Please let us know if your issue is solved, so we can close properly this ticket. Thanks so much for using TI products.

Arm-based microcontrollers

Arm-based microcontrollers forum

Changing device serial for CLI flashing at runtime