MCU for ECU

Deniz CELIKER

Prodigy 10 points

Other Parts Discussed in Thread: AM6442, DRA821

We are looking for microprocessor to be used in ECU for vehicle control.

-CAN controllers must be more than five.

-SPI and UART interfaces should be as much as possible.

-It should be continuous about production.

Can you recommend us a acceptable processor please ?

over 4 years ago

0 MatthewPate over 4 years ago

TI__Guru* 81490 points

Deniz,

I'm transferring this over to our Sitara team vs a C2000 MCU. They will have a larger number of peripherals per device, more inline with your request.

Best,

Matthew

0 Arnon Friedmann over 4 years ago in reply to MatthewPate

TI__Intellectual 2465 points

devices like the AM6442 have 2 CAN controllers but can be supplemented with CAN over SPI. Other devices like DRA821 have 20 CAN controllers

0 Deniz CELIKER over 4 years ago in reply to Arnon Friedmann

Prodigy 10 points

What does MCU need to have in order to communicate with CAN over SPI ?

0 Prasad Jondhale over 4 years ago in reply to Deniz CELIKER

TI__Mastermind 27743 points

Hi Deniz,

Sorry for no response on this thread. Let us know if you have all information you looking for.
Please create a new thread if any information needed. Thanks your understanding.

Regards,

Prasad

Arm-based microcontrollers

Arm-based microcontrollers forum

MCU for ECU