RM57L843: HalCoGen project file for HERCULES_SAFETY_MCU_DEMOS

Hi Koichiro,

I don't have HAL project files (*.hcg, *.dil). BTW, those demos don't have ethernet demo.

Hi QJ,

QJ Wang said:

I don't have HAL project files (*.hcg, *.dil).

I thought someone made these demo should used HalCoGen. Do you mean HAL project files do not exist anymore?

QJ Wang said:

BTW, those demos don't have ethernet demo.

Customer understood it. He is planning to add below ethernet sample you provided.

https://e2e.ti.com/support/microcontrollers/other-microcontrollers-group/other/f/other-microcontrollers-forum/997216/rm57l843-ethernet-sample-codes/3683890#3683890

Btw, customer could not find information how to use Hercules_Safety_Demos. There is no document.
Do we have user's guide, etc.?

Thanks and regards,
Koichiro Tashiro

Hi Koichiro-san,

The demo SW developer did not keep the HAL project files (*.hal, and *.dil). There is no user guide for HERCULES_SAFETY_MCU_DEMOS.

Hi QJ,

How customer knows the usage of the demo?

QJ Wang said:

There is no user guide for HERCULES_SAFETY_MCU_DEMOS.

Thanks and regards,
Koichiro Tashiro

Hi Koichiro-san,

The demo GUI has help. For example the help for LED light show.

Hi QJ,

Customer installed the demo on the PC.
RM57L HDK is used and demo firmware is written.
Then customer launch the GUI (HDK Safety Demoes.exe).
But when either "Ambient Light", "Ambient Temperature" or "Light Balancing" is clicked, below error is generated.

"Connection to the microcontroller has been lost, please hit the PORST reset button and try again.
If this error persists please exit to the launch pad and rerun the demo."

Customer connects HDK and PC with USB cable.
What is possible cause  of the error?

BTW, there are many *.exe files, which one is correct one for RM57L HDK?


Thanks and regards,
Koichiro Tashiro