TMS570LC4357: CCS build from command line

Eyes ForEver

Dear community,

I am trying to build a project from the command line.

I have followed the instructions from https://software-dl.ti.com/ccs/esd/documents/ccs_projects-command-line.html but every time I try to execute the command it shows the help information.

Here is a screenshot.

What I am doing wrong?

Any help or comments are welcome!

over 4 years ago

0 Ki over 4 years ago

TI__Guru**** 481951 points

Hello,

There is a known issue with the CCS CLI project commands and PowerShell (standard DOS command window is fine). Please see the below link for more details:

[edit: wrong link. Please see post below]

Thanks

+1 Ki over 4 years ago in reply to Ki

TI__Guru**** 481951 points

Sorry, posted the wrong link in my first post. The thread I really wanted to mention is:

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/895760/ccs-codecomposer-command-line-projectimport-not-working/3311915#3311915

0 Eyes ForEver over 4 years ago in reply to Ki

Prodigy 11 points

Thanks, that solution works like a charm.

I used this example, where every "-ccs.xxx" has to be written with ""

C:\ti\ccs1031\ccs\eclipse\eclipsec.exe -noSplash -data "C:\workspace_v10\" -application com.ti.ccstudio.apps.projectBuild "-ccs.projects" NAME "-ccs.configuration" Debug "-ccs.buildType" full

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LC4357: CCS build from command line