TI_RTOS is there a decent training manual from TI.

Naasik Hendricks

Good Day

I was wondering if TI has a decent training manual for the TI-RTOS, with out me introducing someone to those Ten videos that has not context or actual value and without spending 500usd on a course?

Best regards

over 4 years ago

0 JohnS over 4 years ago

TI__Guru**** 162885 points

I believe you posted this same question a week ago:

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/1052688/ti_rtos-is-there-a-decent-training-manual-from-ti/3899629?tisearch=e2e-sitesearch&keymatch=%2520user%253A490618#3899629

In that thread, you mentioned that you are using both C2000 and MSP430. I am going to flag this thread for the C2000 team to look at. They can speak to what is available for C2000.

In general when posting to E2E you want to specify the exact device that you are using. That way it will be directed to the appropriate team. Answers will be faster that way.

Regards,

John

0 Naasik Hendricks over 4 years ago in reply to JohnS

Prodigy 60 points

Hi John

I was advised to direct this to the mcu group which I did...

As for the hardware I don't think should be a major issue. As I know TI had a good training on this topic previous... can you advise how getting worse possible generic answer "we no long have that material available"? I know the good training was scrubbed off the internet.... I am posting it here because i hope that maybe the community can provide me with help...

Regards

0 Whitney Dewey over 4 years ago in reply to Naasik Hendricks

TI__Guru 54195 points

I recall the training you seem to have in mind, but it does appear that it's no longer available unfortunately. The kernel workshop lab guide is still here, but I'm not aware of anywhere the actual lab projects can be downloaded, so I expect the guide will be of limited use.

The Embedded Advantage training is the most complete training I know of. Some other resources I can think of are the TI-RTOS Kernel User's Guide (find it in the SYS/BIOS section in the CCS Help contents) in which several of the chapters do link to some training videos (different from the training.ti.com ones you mentioned) and of course browsing the SYS/BIOS example projects that are available in CCS.

Whitney

0 Naasik Hendricks over 4 years ago in reply to Whitney Dewey

Prodigy 60 points

Hi Whitney

Thank you for confirming that most of the decent training was scrubbed. As for Embedded Advantage I am not happy with a concept like this.

Does TI have any ambition to rewrite or make the tools available that was available in the past?

I also know TI stopped all training on MCU. Not sure why?

Kind Regards

+1 Whitney Dewey over 4 years ago in reply to Naasik Hendricks

TI__Guru 54195 points

There aren't currently any plans to create new or re-release trainings for TI-RTOS.

As for MCU training, I'm in C2000 and not familiar with what the other product lines have, but we just recently refreshed our workshops for quite a few of our devices. You can find the latest hands-on training modules here as well as an archive of the older ones.

Whitney

0 Naasik Hendricks over 4 years ago in reply to Whitney Dewey

Prodigy 60 points

Hi Whitney

Thank you

Arm-based microcontrollers

Arm-based microcontrollers forum

TI_RTOS is there a decent training manual from TI.