LP-AM243: Build a multi-protocol Demo and unable to scan AM243X-LP

Shaoxing Ke

Part Number: LP-AM243

Hi Expert，

I am building a multi-protocol Demo based on the above case, and I encountered the slave station cannot scan？as below:

EtherCAT and Profinet are all can not be scaned by the Codesys.

0 Sahin Okur over 3 years ago

Hello,

The device description files are located in MCU+ SDK inside the following directories.

Thanks for bringing this to our attention. We will update our documentation to mention this step.

Regards,
Sahin

0 Shaoxing Ke over 3 years ago in reply to Sahin Okur

Hi Sahin,

Yes, I have done this, but it still can not be scanned by the CODESYS,

0 Sahin Okur over 3 years ago in reply to Shaoxing Ke

This was resolved offline by supplying a PN station name and IP (via auto-IP) in the "Scan for devices" window.

Regards,
Sahin

Arm-based microcontrollers forum