• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-AM243: How do we distinguish between those with protocol and those without protocol

Shaoxing Ke
Intellectual 2835 points
Part Number: LP-AM243

Hi Expert，

     I know the AM243x family supports integrated industrial protocol stacks, but how to distinguish bare metal version without protocol?

     Based on the industrial communication of Sitara products, how many modes can we support? The agreement is all from Kumbus? Or from a third-party protocol company?

     So when we are promoting our Sitara products, how do we distinguish between those with protocol and those without protocol?

     

  • +1
    TI__Genius 11415 points

    Hi Shaoxing,

    Please reference the "Features" parameter in the AM243x part nomenclature in the data manual with values noted below.  Value F enables the TI-Kunbus protocols in the MCU+ SDK.  Third party protocols can be enabled with D, E, or F depending on the needs of the customer.

    –Value = C: PRU-ICSS disabled

    –Value = D: PRU-ICSS enabled; networking firmware runs

    –Value = E: PRU-ICSS and EtherCAT HW Accelerator enabled; run EtherCAT firmware with Beckhoff SSC stack

    –Value = F: PRU-ICSS and EtherCAT HW Accelerator enabled; full stack support enabled

    Regards,

    Mike