ISO26262 Compliance for ARM-CGT 5.2.9 (Tool Qualification)

Vijaykumar Vaghasiya

Other Parts Discussed in Thread: ARM-CGT

We are using ARM-CGT 5.2.9 compiler for development of Safety Critical Software. To comply with safety requirement of ISO26262, we have to provide tool qualification report to assessment authority as evidence. Could someone help here with how TI can support here ?

over 4 years ago

0 Chester Gillon over 4 years ago

Guru 92251 points

I haven't had to use it, but does Safety compiler qualification kit help?

The overview on the referenced web page contains:

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

0 Vijaykumar Vaghasiya over 4 years ago in reply to Chester Gillon

Prodigy 10 points

For the moment, Yes I believe that it would help.

We have evaluated our compiler use cases and if there is such qualification kit available than we would like explore it to validate our use cases.

0 Frank Livingston over 4 years ago in reply to Vijaykumar Vaghasiya

TI__Mastermind 30108 points

Please see this e2e thread: https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/840161/ccs-ccstudio-can-you-share-iso-26262-tool-qualification-report-of-ccs

Regards,
Frank

Arm-based microcontrollers

Arm-based microcontrollers forum

ISO26262 Compliance for ARM-CGT 5.2.9 (Tool Qualification)