LP-AM243: Unable to load ethernetip_adapter_demo project

Kevin Joly

Part Number: LP-AM243
Other Parts Discussed in Thread: SYSCONFIG

Hello,

As requested on This thread, I am trying to boot the "ethernetip_adapter_demo" project. Unfortunately, I am getting this error even after a fresh install:

Import failed for project 'ethernetip_adapter_demo' because its meta-data cannot be interpreted. Please contact support.

Thanks by advance,

Kevin

over 4 years ago

0 Dhaval Khandla over 4 years ago

TI__Mastermind 28374 points

Hi
Are you facing this issue only with this example, or with all examples?

Can you share the CCS version which you are using? Also, can you share the path you see for SysConfig in the "Discovered Products" window after going to "Window->Preferences->Code Composer Studio->Products" in CCS?

In the meanwhile, you can check the makefile based build option for build the application. For more details, see https://software-dl.ti.com/mcu-plus-sdk/esd/AM64X/08_01_00_36/exports/docs/api_guide_am64x/GETTING_STARTED_BUILD.html

Regards
Dhaval Khandla

0 Frank Livingston over 4 years ago

TI__Mastermind 29858 points

Hi,

My understanding is that you're unable to import the CCS projects into CCS. Can you please confirm?

I'm unable to reproduce this issue. I was able to successfully import both of these projects:

<SDK>/examples/industrial_comms/ethernetip_adapter_demo/mii/am243x-lp/r5fss0-0_freertos/ti-arm-clang/example.projectspec
<SDK>/examples/industrial_comms/ethernetip_adapter_demo/rgmii/am243x-lp/r5fss0-0_freertos/ti-arm-clang/example.projectspec

I'm using the tool versions mentioned in the SDK guide here: https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/08_01_00_36/exports/docs/api_guide_am243x/GETTING_STARTED.html

Regards,
Frank

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-AM243: Unable to load ethernetip_adapter_demo project