AM2432: Power Settings

Mari Tsunoda

Part Number: AM2432
Other Parts Discussed in Thread: SYSCONFIG

Hi Team,

My customer has a question regarding how to set the power settings.

The SysConfig has a power domain tab when the software product is not selected, but if they select the software product, they cannot set the power settings.

How can they change the power settings? If they cannot, where can they see the default settings for it (in code)?

Best regards,

Mari Tsunoda

over 3 years ago

0 Mari Tsunoda over 3 years ago

TI__Expert 5726 points

Hi,

Can I get an update on this soon?

Best regards,

Mari

0 Fleenor over 3 years ago in reply to Mari Tsunoda

TI__Mastermind 22893 points

Hey Mari,

There are no default settings/SW for this information in code. The power domain details are pulled from the same source as the Datasheet content and is meant purely to provide a high-level warning for pins with possible conflicting voltages. It is purely up to the HW/PCB/SYSTEM Engineer to ensure the Power Pins are connected and supplied per datasheet requirements.

Best Regards,

Zackary Fleenor

0 Mari Tsunoda over 3 years ago in reply to Fleenor

TI__Expert 5726 points

Hi Zack,

So to confirm, there isn't really a way to set or check the voltages like in the power domain tab.

Best regards,

Mari

0 Fleenor over 3 years ago in reply to Mari Tsunoda

TI__Mastermind 22893 points

Correct, this voltage check only happens when using the core SysConfig-PinMux Tool, not while using an SDK SW product.

0 Fleenor over 3 years ago

TI__Mastermind 22893 points

Hello Mari,

Can this issue be closed?

0 Mari Tsunoda over 3 years ago in reply to Fleenor

TI__Expert 5726 points

Hi Zack,

Yes, marked as resolved. Thanks for the support!

Mari

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2432: Power Settings