LM3S6911: Device descriptor

Ian Smith

Part Number: LM3S6911

Hello,

I need to rebuild some old code for a board of ours that uses an LM3S6911 micro. Unfortunately the latest CCS (V11) does not appear to support this device. Is there any version of CCS that I can download that will support this chip? Is there any way I can get CCS V11 to recognise this device?

Cheers,

Ian

over 3 years ago

0 Chester Gillon over 3 years ago

Guru 92251 points

Ian Smith said:
Is there any version of CCS that I can download that will support this chip?

According to Deprecation notices CCS v6.2 was the last CCS version which had support for Stellaris devices. That referenced page has download links for CCS v6.2.

Ian Smith said:
Is there any way I can get CCS V11 to recognise this device?

Has CCS 7 dropped support for LM3S and LM4F devices? describes a procedure to copy Stellaris support files from a CCS v6.2 installation in CCS v7, but I'm not sure of the latest CCS version in which that will work.

0 Charles Tsai over 3 years ago in reply to Chester Gillon

TI__Guru**** 190896 points

Hi Chester,

Thank you for pulling up the old post that will be extremely useful for the poster.

0 Ian Smith over 3 years ago in reply to Chester Gillon

Prodigy 10 points

Thanks for providing this information. I will see if installing V6.2 works.

Cheers,

Ian

Arm-based microcontrollers

Arm-based microcontrollers forum

LM3S6911: Device descriptor