• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 465 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C123FH6PM: TM4C123FH6PM SSI Port Configuration

Bogdan Banik
Prodigy 30 points

Part Number: TM4C123FH6PM
Other Parts Discussed in Thread: LP5860,

Is the TM4C123FH6PM  SSI port compatible with TI's LP5860 LED Driver SPI Interface? If so, how should the TM4C123FH6PM SSI port be configured (TI synchronous serialinterface?, Freescale SPI?, etc.)?

  • 0
    TI__Guru*** 135355 points

    Hello Bogdan,

    I don't think the TI SSI format is really used in new products at this day and age, that was an older protocol before Freescale's became the popular standard. I would configure it for Freescale SPI and make sure to select the right Master Mode based on the data format.

    Best Regards,

    Ralph Jacobi