TMS570LC4357-EP: ECC generation using CMD file

Subash Sundaresan

Part Number: TMS570LC4357-EP
Other Parts Discussed in Thread: TMS570LC4357

Hi Support team,

We are using TMS570lc4357 and I would like to use CMD file (compiler linker) to generate the ECC instead of tool. Could you please provide me the cmd file for the mentioned part number.

-Subash

over 3 years ago

0 QJ Wang over 3 years ago

TI__Guru**** 196346 points

Hi Subash,

Please take a look at our notes at:

https://software-dl.ti.com/hercules/hercules_docs/latest/hercules/How_to_Guides/HowToGuides.html#launchxl2-570lc43-rm57l-linkereccrecommendation

0 QJ Wang over 3 years ago in reply to QJ Wang

TI__Guru**** 196346 points

This is one of my example:

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/908/3010.HL_5F00_sys_5F00_link.cmd

0 Subash Sundaresan over 3 years ago in reply to QJ Wang

Prodigy 150 points

Hi QJ Wang,

Thank you very much for your response!

I made the configurations as mentioned and tried to debug the code, however after flashing the code it is not going to Debug mode. If the flash settings to default (Auto ECC generation) it is working as expected. I have attached snapshots for your reference.