TM4C129ENCZAD: About the firmware when shipped from the factory

Ok, Thank you for your replying.
By the way, does the vergin chip mean no used IC?
If then Your recognizing is correct.

In the case we install XDS110 Firmware, We must follow the step of the sentence in below URL.

e2e.ti.com/.../3060977

aozer said
The COM ports will not show up until the XDS firmware has been flashed. Please download and install the XDS110 emulation package:
XDS Emulation Software (EMUPack) Download
processors.wiki.ti.com

This page contains drivers and utilities to support TI XDS class Debug Probes..

Navigate to the following path:

C:\ti\ccs_base\common\uscif\xds110

From here open a command prompt and issue the following commands:

xdsdfu.exe -e
xdsdfu.exe -b bootloader.bin
xdsdfu.exe -f firmware.bin -r
xdsdfu.exe -e

The next , If we install the firmware to TM4C, we must prepare for XDS110 Debugger and Port for JTAG Connection?

Please tell me the way to install XDS110 Firmware to virgin chip.

Thank you!