Processor Suggestion for Camera related applications

Jagan K

Other Parts Discussed in Thread: TDA4VM

Hope you are doing Good!
We are working on our new project based on Camera application and we are looking for a Processor which matches our new project. I have listed out the requirements below, pl suggest some

Requirements :
1. MIPI CSI-2 Interface
2. SDIO support
3. Linux OS Support
4. Dual Band WiFi Support
5. I2C, GPIO, ADC, I2S & UART

Thanks
Jagan K

over 3 years ago

0 Srik Gurrapu over 3 years ago

TI__Expert 3353 points

Thank you for your email. The TDA4VM processor is a good choice for this. Please see below link and let us know more questions.

https://www.ti.com/product/TDA4VM

You will find a lot of developmnts tools from this link. Thanks Srik

0 Zain Nasir over 3 years ago

Expert 1420 points

Raspberry Pi 4 is also a good choice for your project. It can fulfill your requirements. Besides, Raspberry Pi has lots of resources online. You can interface a Raspberry Pi camera, Pixycam or any other camera with CSI connector.

This is just an example: https://www.theengineeringprojects.com/2022/09/security-system-with-image-capturing-in-raspberry-pi-4.html

You will find many more like this.

0 Jagan K over 3 years ago in reply to Srik Gurrapu

Prodigy 170 points

Thanks for the Suggestion,
But the suggested part looks costly, is there any part that can satisfy the cost.

0 Jagan K over 3 years ago in reply to Zain Nasir

Prodigy 170 points

Thanks, Nasir.
Raspberry Pi zero matches our requirements but it is non-stocked. is there any SBC that matches the Pi zero?
Any suggestion on the Processor that works similar.

0 Zain Nasir over 3 years ago in reply to Jagan K

Expert 1420 points

You can take a look at these boards: itsfoss.com/.../

Arm-based microcontrollers

Arm-based microcontrollers forum

Processor Suggestion for Camera related applications