• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 1768 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UNIFLASH: Error connecting to the target: (Error -183 @ 0x0)

Oleksandr Levandovskiy
Prodigy 20 points

Part Number: UNIFLASH
Other Parts Discussed in Thread: CC1310

I used XDS200 DEBUG PROBE for flash CC1310F128 TI IC. This goes one year good. Since some days I can't flash any more.  I got message :

Error connecting to the target: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 9.9.0.00040).
Console Output:
9.11.2022, 07:40:03] [INFO] Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
[9.11.2022, 07:40:04] [ERROR] Cortex_M3_0: Failed Board Reset: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 9.9.0.00040)
[9.11.2022, 07:40:04] [ERROR] Cortex_M3_0: GEL: Error while executing StartUp( 12, 1, 0, 2885 ): Reset failed: retcode=-1 at GEL_AdvancedReset("Board Reset") [cc26x0.gel:29] at StartUp(12, 1, 0, 2885)
[9.11.2022, 07:40:04] [ERROR] IcePick_C: Error connecting to the target: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 9.9.0.00040)
[9.11.2022, 07:40:33] [INFO] Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
[9.11.2022, 07:40:33] [ERROR] Cortex_M3_0: Failed Board Reset: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 9.9.0.00040)
[9.11.2022, 07:40:33] [ERROR] Cortex_M3_0: GEL: Error while executing StartUp( 12, 1, 0, 2885 ): Reset failed: retcode=-1 at GEL_AdvancedReset("Board Reset") [cc26x0.gel:29] at StartUp(12, 1, 0, 2885)
[9.11.2022, 07:40:34] [ERROR] IcePick_C: Error connecting to the target: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 9.9.0.00040)
I changed USB Cable - same Error. I changed XDS200 DEBUG PROBE - same Error. I changed CC1310F128 Board - same Error. I installed Uniflash on another LapTop - same Error.
LapTop run under Windows 10. UniFlash Version Version: 8.1.0.4125
What can be done to bring UniFlash working?
regards
Alex