Other Parts Discussed in Thread: HALCOGEN
hello,
I would like to ask for help with code examples for the blink led test on the TMS570LS0432
I'm super noob with the boards Hercules model and I'm having a lot of trouble with it
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hello,
I would like to ask for help with code examples for the blink led test on the TMS570LS0432
I'm super noob with the boards Hercules model and I'm having a lot of trouble with it
Hi Lais,
It is very easy to develop projects using Hercules devices.
There are number of ready-made examples are available for these devices.
Basically, you need 2 software's to get started with
1. CCS (Code Composer Studio) - It is an IDE used for build, debugging and flashing the project to the hardware
2. HALCoGen - Which is useful to generate the driver layer for the project
You can download these projects in below link
TMS570LS0432 data sheet, product information and support | TI.com
Once you downloaded them watch below video, to know how to create an LED blink project
Hercules Tutorial: Turning on the LEDs - YouTube
You can also use below document
How to Create A HALCoGen-Based Project For CCS (Rev. B) (ti.com)
Once you downloaded HALCoGen right, you can find number of examples for your device in HALCoGen itself
just go through help topics in HALCoGen
Once you go through the Help Topics
You can find number of examples for the corresponding device which you created a project and there is a step-by-step procedure to create project, you can just follow those steps.
--
Thanks & Regards,
Jagadish.