UNIFLASH: Code download to a single processor

Aditya Ghule1

Part Number: UNIFLASH

Hi,

I have a PC with 2 DSPs connected. Is there a way to use UNIFLASH to download code to only one of the two DSPs? ( by choosing the COM port number or something?)

Thank you,

Aditya

over 3 years ago

0 Ki over 3 years ago

TI__Guru**** 475651 points

Hello Aditya,

I assume you have two single CPU devices daisy-chained together instead of one multi-core device. Is this correct?

Thanks

0 Ki over 3 years ago in reply to Ki

TI__Guru**** 475651 points

Ki said:
I assume you have two single CPU devices daisy-chained together instead of one multi-core device. Is this correct?

or two separate boards connected to the same PC?

0 Aditya Ghule1 over 3 years ago in reply to Ki

Intellectual 440 points

Hi Ki,

This is just two evaluation boards connected to the PC through two separate USBs

Thanks,

Aditya

+1 Ki over 3 years ago in reply to Aditya Ghule1

TI__Guru**** 475651 points

Aditya Ghule1 said:
This is just two evaluation boards connected to the PC through two separate USBs

Please see: https://dev.ti.com/tirex/explore/node?node=A__ACKSQqESf97I3SKc1veJEw__sdtoutilities__FUz-xrs__LATEST

Thanks

Arm-based microcontrollers

Arm-based microcontrollers forum

UNIFLASH: Code download to a single processor