TMDSEMU110-U: Is XDS560 or XDS200 OK?

Hiroyuki Kanematu

Part Number: TMDSEMU110-U
Other Parts Discussed in Thread: TM4C129ENCZAD, AWR1843

Hello, I was trying to load XDS110 on TM4C129ENCZAD, but Debugger is not driving as per below URL.

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1185252/tm4c129enczad-what-to-do-when-the-device-is-not-found/4473179#4473179

After installing XDS110 on TM4C, I would like to load programs into AWR1843 and run it as a debugger.
(Will the XDS560 or 200 work as an alternative?

over 2 years ago

0 Pranali Gaydhane over 2 years ago

TI__Prodigy 470 points

Hi,

The expert is out of the office because of Holiday. Please expect a reply by Tuesday.

Thanks.

0 aozer over 2 years ago

TI__Mastermind 30545 points

Hello,

I am a little unclear on your question.

Were you able to get the TM4C to work as expected? If so you should not need to use an external debugger. You can connect to JTAG in CCS over USB using the T4MC MCU.

Are you wanting to use an external debugger instead of the TM4C?

Regards,

Adria n

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSEMU110-U: Is XDS560 or XDS200 OK?