TMDSEMU110-U: firmware for TM4C123

HS FAE Germany

Part Number: TMDSEMU110-U
Other Parts Discussed in Thread: EK-TM4C123GXL

Hello,
customer uses the EK-TM4C123GXL and now they want to design their own HW but also with a TM4C123GH6PMI as XDS110 on his board. Is it possible to flash the TM4C123GH6PMI with the XDS110 firmware over JTAG? Where is the TM4C123GH6PMI firmware located?

Regards, Holger

over 2 years ago

0 Kevin Allen18 over 2 years ago

TI__Mastermind 45166 points

Hi Holger,

We don't usually suggest including the emulator device on an end product PCB design, instead it's better just to have a connector for external probe connection. Any specific reason they want to put the XDS110 on their board itself?

The XDS110 firmware is found in the CCS installation. See 'Manual Update' section on the page below for details.

https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html

Best,

Kevin